Opqrstu3D designs models for our printer and models for our Shapeways shop. Mostly, Shapeways models are too complicated to print without support on the opqrstu3D printer. I always print without support, because I don’t like the works that come after removing the support, like cleaning and sanding.
Anyway, this week I was cleaning up the Shapeways shop (removing unpopular models) and saw a light, I designed at least four years ago. I deleted it with pain in my heart. Yesterday, it was Friday. Time to check out weird things. This week’s weird thing was to check out how Leapfrog Creatr would handle the deleted Shapeways model. The first three trails failed, but at minimum speed (10 mm/sec) the robot did an amazing job and produced an unbelievable an completely unexpected 3D print:
The robot printed these things (without support) upside down. The printing of the first 30 layers was very tricky. These layers are far from perfect, everything moved when a new layer was added. The design is simply to steep to print. When the angle became less steep, the printing stabilised and without problems Leapfrog Creatr 2013 completed it’s most complicated print job ever. Layer height: 0.3 mm.
Lesson: try the impossible and you will become a wiser man. Another opqrstu3D print experience.