FullMoon

Today, 12 volt LED bulb’s are getting better and cheaper, but they do not run on 220 Volt. You can buy all kinds of 220 volt LED’s, but these are quite expensive. Can 3D printing help us to connect 12 volt LED’s directly to 220 volt light systems? Some posts ago, I designed and printed JellyLight. It connects a 3 Watt, 12 volt LED to a regular 220 volt home system, but is not easy to assemble/use.

Now there’s FullMoon, a very simple three parts 3D printed light. FullMoon fits easy in almost any modern living. Opqrstu3D printed it on 3D4makers transparent PET-g and tested it in the opqrstu studio. This light is much easier to assemble and has an ‘infill only’ printed light head. The ‘infill only’ structures create an organic, silky or moony look.

FullMoon © opqrstu 2016
FullMoon © opqrstu 2016

Creatr is printing on it’s original old nozzle again and as predicted: FullMoon looks perfect. For your information: a complete FullMoon needs an eleven hours print job (0.3 mm layer height). To assemble this light, you need a constant voltage 12 volt LED driver, some wires, some very small screws, two small connectors and a 3 watt/12 volt LED. Save energy!