Here we go

Some weeks ago we were asked to design a light with logos to present to Secretary of State Keijzer and prince Constantijn on the opening of the Dutch young tech startups pavilion of the Hannover Messe 2018. We did, and on the first of May the pavilion was opened by secretary of state and the prince. This event was hosted by a young tech company called 3D4makers. They invented a waterless production process of 3Dprint filaments. SCHOONE LIGHTS uses 3D4makers PET-G in it’s prints, with great results.

Three logos in a light, Hanover Messe 2018

During the passed two years, Gerard Schoone designed many variations of his smart light systems on 12 Volt (PATERNOSTER). Kees Kamper prototyped the ‘infill only’ parts and together they created the Schoone Light Collection.
On 6, 7 and 8 June The Schoone Light Collection is presented at Design District Rotterdam in the Van Nelle Factory. Check our newsletter for additional information about SCHOONE LIGHTS at DDR 2018.

Schoone Lights had a wonderful time at Rotterdam Design District. In fact we were surprised by the amount of positive attention our product received. Many visitors liked what they saw, but were curious about what they were looking at. Understandable, because when you see ‘infill only’ 3D prints for the first time,  you might think: is it a kind of fabric or is it perhaps glass? Regular 3D prints have a plastic look and feel, ‘infill only’ products are mysterious.

Some months later, at ‘MEESTERLIJK’, a 3 day event the Westergasfabriek Amsterdam (where professionals from traditional craft such as silversmiths and woodworkers together with designers and manufacturers of handmade design expose their products) we had the same experience. Many people took a closer look at our ‘infill only’ shades, but did not dare to touch them. When we told them, they could, most people were surprised. They expected very fragile material, but they experienced a strong and stiff lamp shade: nice surprise.

A month ago Kees was interviewed by Bob Timroff of the Dutch tech magazine MACHINA. Bob wrote a great story about the Kees Kamper’s 3D print adventures and Bob tells the ‘infill only’ story better than we do.

At Alosery Art & Design you can experience and buy several editions of the ‘Paternoster’ light system.

Old idea, new light

In our last post we used 3D printing to create a new part to build a better version of an almost forgotten chandelier. Gerard modified the steel rods and in this post we use the same central part to present a fully 3D printed chandelier: TRAPEZE 02

TRAPEZE 02 ©Schoone Lights 2018

The same light shades we used in our standing lights, are now building a hanging light. One can also put this light system upside down and it becomes a standing light!

Trapeze 02 is rather big, how about a smaller version?
After some adaptations of the central 3D printed part we prototyped TRAPEZE 03. To complete the Schoone Lights collection 2018 we also needed a wall light. New modifications of the central part gave birth to WALL ONE.

TRAPEZE 03 and WALL ONE ©Schoone Lights 2018

It’s amazing to see how 3D design and printing allows you to check out (prototype) your ideas in a very short time. Some years ago you needed a expensive molding service to build your prototypes. Today some 3D modelling and 3D printing do this trick faster and cheaper.

un3Dprinted

Four years ago, I knew nothing about 3D printing. In my spare time I did some 3D drawing in SketchUp, mainly Amsterdam canal houses. I liked it to build 3D models of canal houses on Google Earth. It was not easy but I learned a lot about 3D by just doing it. Opqrstu3D knew 3D printers existed, but was not interested: too expensive and I had really no idea what to do with this machines.

Today, I am almost four years addicted to 3D printing. Life is never what you think it will be! On the Dutch Design Week 2013 there was a challenge: 3D-draw a light that can be 3D printed. I like challenges, had noting to loose, checked the internet for tutorials and started drawing. My light was one of the few printable models. Five lights were exposed at the DDW2013 and mine won the Dutch3Design Award 2013. With the award came a Leapfrog 3D printer. I was amazed and even more amazed when the machine arrived: it looked very cool, but I had no idea about how this robot would fit in my life. I never 3D printed before and knew noting about this machine and how to operate it.

It took about nine months before I controlled my Leapfrog; it was blood, sweat and even tears, but also very rewarding. Printing a photo at home, is nice, but 3D printing your own product and holding it in your hands is very special. And after every print, there’s always the question: “What shall I design and print next?” 3D printing became a life changer,  a 24/7 addiction

During the first two years, I designed and printed the usual stuff: cups and cups and vases and different vases. Very boring and certainly not a life changer. But life is never what you expect it will be, and one day my 3D printer went totally out of control and printed crap only. I tried and tried, but could not control the robot anymore, it printed crap vases and crap cups. No smooth perimeters, just bubbly surfaces. I tried changing all kind of settings  without results, I was very frustrated. Leapfrog Creatr weights 35 kilo, so I could not throw it out of my window, instead I told (Slic3r) the machine to print zero perimeters or infill only. A very stupid decision, but not that stupid after all. It was my first infill only 3D print and the moment an addiction started and my life changed. Infill only 3D printing creates an unique un3Dprinted look and feel and the possibilities are endless.

Today, I print incredible light shades and unseen jewelry. In regular 3D printing you want real smooth surfaces, in infill only 3D printing, you fiddle with patterns and densities to create unexpected products. The same model can and will appear in many different looks and feels. The possibilities are endless, the ‘torture’ never stops and I like it.
Four years ago, I was just a normal guy. Today, I am a 3D-designer/ manufacturer of light systems and jewellery. Wanna see more? Visit my Instagram account: @prdcz

INFIIL ONLY BRACELETS

3Dprinting industry

iBook12

Three years ago opqrstu3D designed it’s first light: YAN.


A week ago Nick Hall wrote on 3Dprintingindustry.com: “….The energy savings on offer with this system (KCc) are substantial and it’s such a simple idea that has been turned into reality by a man that was struggling to make his 3D printer work at all. … Now he has ironed out the bugs with his Creatr and tamed his robot, Kamper and Schoen (opqrstu) are turning into a force to be reckoned with and could take the home design world by storm.”

True words, we go for it.

woven glass?

Today, Creatr printed ‘brocade’ on transparent PET-G. The most functional light in opqrstu3D history. Very clear, but structured enough to dim the direct light power of LED’s. Again, ‘infill only’ comes with an un3Dprinted look. This time, clear PET-G infill makes me think of woven glass: very thin (1 mm) but structured, excellent for 12 Volt, 1 Watt LED.

brocade © opqrstu2016
brocade © opqrstu 2016

Opqrstu3D designed ‘brocade’, but it’s just an imitation of a very classic light shade. This shape became classic because it does what it has to do: spreading photons, the way we like it.

Are these lights affordable?

When you are an experienced 3D printer and study the ‘infill only’ concept, these lights are very affordable: once designed, you can print as many as you want. Creatr needs 4 hours to complete this job. It’s a tricky job, so not every print will survive. A ‘brocade’ light shade consumes 13 meters Pet-G and some electricity. You also need a very cheap LED driver and print a save housing around it: another 13 meters of filament on a 4 hour print job. Together: 26 meters PET-G, 8 hours of printing, some electricity and some cheap things, max: 15 dollars pro ‘brocade’ light system. Do It Yourself and save a whole lotta a money and energy.